How To Install Ball Catch On Door

A ball catch is generally used on linen closet doors where a latch is not used or needed, but it can also be used on kitchen cabinet doors or where two double doors run into without a center door jamb.

They're used primarily for interior doors and can be used most anywhere for light-duty apply. The ball catch comes in two pieces with a variety of finishes and colors bachelor.

I half contains a spring-loaded brawl, and the other half (the striker) has a cup or pocket-sized U-shape formed in the middle. The brawl catch tin exist mounted on the height, bottom, or side of the door.

Here is a how-to on mounting this type of hardware in your interior doors.

Step 1 - Drill a Hole

Using an electric drill, drill a hole on the edge surface of the door at the location you want.

Step 2 - Mount the Strike Plate

Mount a strike plate on the door jamb that is opposite to where the spring-loaded ball grab location is. This holds the door closed. A pull on the door will release the grab.

When installing the strike plate, be sure to properly line up the striker and ball catch properly and determine the depth of the recessed hole that is needed for proper functioning.

In guild to make your life easy with regard to making sure the depth is correct, purchase an adjustable unit that can be made longer and shorter to achieve the proper tension against the striker.

Addressing the task of lining them up is a scrap harder. Apply some carbon trace newspaper with the shiny carbon side facing against the contrary surface where the ball catch is located. Hold the newspaper in this surface area and close the door.

The ball catch will curl over the paper when you close the door and make a line on the surface. Where the line stops or ends is the middle location for the striker loving cup. Mount the striker co-ordinate to this line.

Step 3 - Add the Door Handles

Dummy doorknobs, fancy handles, or anything yous tin imagine can be used on the doors considering you don't demand to turn them in order for them to open or close. A slight tug is all you will need to do.

Step four - Lubricate

Add together a little flake of light oil on the ball take hold of, and wipe off the excess. This is all that is needed in order to accomplish smoothen operation and years of problem-free service.

Tips

In some cases where the doors may remain open (an example of this might be French double doors leading into the dining room), it would be better to place the ball catch in the frame portion at the summit, and the striker cup on the door summit border.

This will prevent a mark on the frame, which would be made past the brawl take hold of rolling over the frame until it reached the loving cup.

You now have a door that will stay closed without a traditional doorknob!

Source: https://www.doityourself.com/stry/installing-a-ball-catch-for-interior-doors

Posted by: rodriguezyeassuileat.blogspot.com

Share this post